Product Introduction

liquid quantitative filling machine

The liquid quantitative filling machine is developed according to the adjustment range of the filling amount of the customer’s actual demand. The outstanding features of this aircraft are:
1. The whole is made of stainless steel plate, the appearance is beautiful and generous, clean and sanitary, in line with food processing requirements.
2. Using microcomputer to control metering, the metering can be adjusted infinitely according to customer needs, accurate measurement and simple operation.
3. It is suitable for the filling of various self-flowing liquids, such as: filling of various liquors, etc.
4, the use of a wide variety of bottles, a variety of shaped bottles can be used, especially suitable for large doses of filling, such as: barrels, cans container filling.
5. The machine has the advantages of compact design, simple structure and low power consumption.
Two basic parameters:
Filling capacity: 100 ml – 1000 ml Unlimited adjustment according to customer needs
Filling speed: 200-2000 bottles / hour (depending on capacity)
Number of filling heads: 2, 4, 6, 8.12 (according to customer needs)
Working voltage: 0.4-1.0 MPa (air compressor must be prepared by the party)
Air consumption: ‹0.2 cubic meters / minute
Power: ‹200W (excluding air compressor)

The capping machine

The capping machine is also known as a capping machine, a capping machine or a capping machine. It is used for screwing and unscrewing the caps of plastic bottles, glass bottles (molded bottles or tube bottles). The capping machine is generally used for the aluminum cap or the aluminum plastic cap capping sealing device after the disassembly of the antibiotic powder injection glass bottle (molded bottle or tube bottle).
The capping machine is one of the main equipments for the automatic filling production line, which is used for the screw cap sealing of glass bottles or PET bottles. With the development of society and the improvement of people’s living standards, people’s requirements for the packaging quality of products are getting higher and higher. Because the screw cap has the advantages of quick sealing, easy opening and re-sealing after opening the bottle, it is widely used in the packaging of many products, such as beverage, wine, seasoning, cosmetics and medicine. The sealing is heavily sealed with a screw cap. At present, the production, speed and automation degree of the capping machines of the same domestically produced models are relatively backward. In order to meet the needs of high-speed, high-efficiency and high-reliability production of modern packaging machines, a rotary capping machine has been developed. The machine adopts multi-station rotary structure, which is electrically integrated, with high efficiency, high speed and reliability. Good and high degree of automation.
2. Structural characteristics
1. The structure of the machine is reasonable and compact, the operation is stable, the operation is flexible, and the specification conversion adjustment is convenient.
2. The bottle is equipped with an adjustable buffer turntable.
3, aluminum cover cover speed is adjustable.
4, there is automatic start and stop function.
5. Adopting the principle of seven-station three-knife rolling cover, the rolled aluminum cover has no damage, the rolling mouth is firm, smooth and flat, and the pass rate is ≥99.5%.
3. Scope of application
Single-head sealing machine is widely used in the production of small batch products in various industries such as wineries, beverage factories, medicines and pesticides. It is mainly suitable for the caps of different specifications and different specifications of aluminum caps.
This machine is suitable for the sealing of aluminum anti-theft cover in various industries.
1. The head adopts the working principle of four-wheel balance, with uniform force and good sealing quality.
2. The sealing wheel is made of special materials and has a long service life.
3. The machine is equipped with an automatic positioning device for the bottle mouth, which avoids many disadvantages of positioning the bottom of the bottle.
4. Adopt continuous operation type inlet and outlet device.
5. There is a clutch protection device at the inlet and outlet dials, which automatically stops when a bottle is in use to ensure safe production.
Performance parameters
Number of caps: single head
Production capacity: 2000 bottles / hour (adjustable)
Applicable cap: plastic cover, metal cover
Applicable bottle height: 100-370mm
Motor power: 0.75KW
Dimensions: 1000*1000*1800

Labeling machine

specifications and features:
Voltage specification: 220V 50/60Hz single item
Power consumption: 2KW
Labeling speed: MAX 30pcs/min (Φ25mm)
Labeling accuracy: ±1mm
Applicable label range: high 10-150mm, length 10-180mm
Maximum label supply: diameter 250mm, paper ring inner diameter 76mm